| 고객문의 |

Lithography

당사의 원자현미경 (AFM) 최적의 성능을 얻으려면 Park Systems에서 견적을 요청하십시오. 아래 나열되지 않은 다른 제조업체의 Probe도 주문 가능하오니 담당자에게 문의 바랍니다.
- Nanosensors, Nanotools GmbH, Nanoworld AG, BudgetSensors, Olympus Corp., MikroMasch, Applied Nano Structures, Inc.
당사의 Probe Store 이외 다른 곳에서 주문한 Probe는 보증되지 않습니다.

Part Num. Model / Description 한국판매가
(단위:원)
부가세 별도
DT-NCHR (10ea.)
610-1057 ▪ Probe suitable for lithography
▪ Backside reflex coating (Al)
▪ Diamond coated tip
▪ Typical tip length: 10 - 15 μm
▪ Typical tip radius: 100 - 200 nm
▪ k = ~80 N/m, f = ~400 kHz
Mounted Type 1,887,000
610-0057 Unmounted Type 1,692,000
ElectriMulti75-G (10ea.)
610-1098-01 ▪ Probe for lithography and electrical modes (EFM/KPFM/DC-EFM/PFM)
▪ Backside reflective coating (Cr-Pt)
▪ Tip shape: Rotated
▪ Conductive tip for electrical application, coated with Cr-Pt
▪ Typical tip length: ~7 μm
▪ Typical tip radius: <25 nm
▪ k = ~3 N/m, f = ~75 kHz
Mounted Type 422,000
610-0098 Unmounted Type 345,000
25Pt300B (10ea.)
610-1115-01 ▪ Probe suitable for lithography and C-AFM
▪ Contact cantilever made of platinum
▪ Solid platinum probe tip and cantilever
▪ Typical tip length: ~80 μm
▪ Typical tip radius: <20 nm
▪ k = ~18 N/m, f = ~20 kHz
▪ Recommended for high voltage/current application above ±10 V or 1 µA
Mounted Type 1,401,000
610-0115
Unmounted Type 1,142,000
CDT-CONTR_T (10ea.), CDT-CONTR (10ea.)
610-1135-01
▪ Probe suitable for lithography and C-AFM
▪ Backside reflex coating (Al)
▪ Electrically conductive diamond-coated tip
▪ Typical tip length: 10 - 15 μm
▪ Typical tip radius: 100 - 200 nm
▪ k = ~0.5 N/m, f = ~20 kHz
▪ Mounted type on Teflon-coated chip carrier
Mounted Type 2,192,000
610-0135
Unmounted Type 2,114,000
CDT-NCHR_T (10ea.), CDT-NCHR (10ea.)
610-1120-01
▪ Probe suitable for SSRM/lithography
▪ Backside reflex coating (Al)
▪ Electrically conductive diamond-coated tip
▪ Typical tip length: 10 - 15 μm
▪ Typical tip radius: 100 - 200 nm
▪ k = ~80 N/m, f = ~400 kHz
▪ Mounted type on Teflon-coated chip carrier
Mounted Type 2,192,000
610-0120
Unmounted Type 2,114,000
PPP-CONTSCPt (10ea.)
610-1073 ▪ Probe for lithography
▪ Backside reflective coating (Cr-PtIr5)
▪ Conductive tip for electrical application, coated with Cr-PtIr5
▪ Typical tip length: 10 - 15 μm
▪ Typical tip radius: <25 nm
▪ k = ~0.2 N/m, f = ~25 kHz
Mounted Type 720,000
610-0073
Unmounted Type 642,000
NSC36/Pt (10ea.)
610-1161 ▪ Probe for lithography
▪ Backside reflective coating (Pt)
▪ Conductive tip for electrical application, coated with Pt
▪ Typical tip length: 12 - 18 μm
▪ Typical tip radius: <30 nm
▪ k1 = ~1 N/m, f1 = ~90 kHz, k2 = ~2 N/m, f2 = ~130 kHz, k3 = ~0.6 N/m, f3 = ~65 kHz
▪ 3 cantilevers on a chip
Mounted Type 474,000
610-0161 Unmounted Type 345,000
PPP-EFM_C (10ea.), PPP-EFM (10ea.)
610-1101-02 ▪ Probe for lithography
▪ Backside reflective coating (Cr-PtIr5)
▪ Conductive tip for electrical application, coated with Cr-PrIr5
▪ Typical tip length: 10 - 15 μm
▪ Typical tip radius: <25 nm
▪ k = ~2.8 N/m, f = ~75 kHz
▪ Mounted type on ceramic chip carrier
▪ Unmounted type required for clip type probehand
Mounted Type 720,000
610-0101 Unmounted Type 642,000
  spambots으로부터 이메일 주소가 보호되었습니다. 보시려면 JavaScript를 활성화하세요.
Contact

Probe Store