| 고객문의 |

True Non Contact Mode

For optimal performance with our AFM systems please request a quote from Park Systems. Mounted cantilevers are additionally tested. All probes that are not listed here from Nanosensors™, Nanotools GmbH, Nanoworld AG, BudgetSensors, Olympus Corp., MikroMasch, Applied Nano Structures, Inc. are possible to order from our probe store. Probes from other manufacturers also can be possible to order upon request for quotation. The peformance of probes ordered from other sources are not guaranteed.

Part Num. Model / Description 한국판매가
(단위:원)
부가세 별도
PPP-NCHR (10ea.)
610-1051 ▪ Non-contact cantilever with high resonant frequency
▪ Backside reflex coating (Al)
▪ Typical tip length: 10 - 15 μm
▪ Typical tip radius: <10 nm
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 494,000
610-0051 Unmounted Type 416,000
SSS-NCHR (10ea.)
610-1056 ▪ Non-contact cantilever with super sharp tip
▪ Backside reflex coating (Al)
▪ Typical tip radius: ~2 nm (<5 nm)
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 1,161,000
610-0056 Unmounted Type 1,083,000
BL-AC40TS (10ea.)
610-1049 ▪ Probe for imaging soft samples
▪ Backside reflective coating (Au)
▪ Tip shape: Tetrahedral
▪ Effective tip length: ~3.5 μm (total 7 μm)
▪ Typical tip radius: ~10 nm
▪ k = ~0.09 N/m, f = ~110 kHz
Mounted Type 921,000
610-0049 Unmounted Type 843,000
OMCL-AC160TS (10ea.)
610-1049 ▪ Non-Contact cantilever with high resonant frequency 
▪ Backside reflective coating (Al)
▪ Tip shape: Sharpened tetrahedral on zero setback position
▪ Typical tip length: ~14 μm
▪ Typical tip radius: ~7 nm
▪ k = ~26 N/m, f = ~300 kHz
Mounted Type 507,000
610-0049 Unmounted Type 429,000
ATEC-NC (10ea.)
610-1020 ▪ Non-contact cantilever
▪ Tip shape: Tetrahedral tip on zero setback position
▪ Typical tip length: 15 - 20 μm
▪ Typical tip radius: <10 nm
▪ k = ~45 N/m, f = ~335 kHz
Mounted Type 713,000
610-0020 Unmounted Type 636,000
ACTA (10ea.)
610-1201 ▪ Non-contact cantilever
▪ Backside reflective coating (Al)
▪ Tip shape: Pyramidal
▪ Typical tip length: 14 - 16 μm
▪ Typical tip radius: ~6 nm
▪ k = ~37 N/m, f = ~300 kHz
Mounted Type 500,000
610-0201 Unmounted Type 422,000
PPP-NCH (10ea.)
610-1125 ▪ Non-contact cantilever with high resonant frequency
▪ Typical tip length: 10 - 15 μm
▪ Typical tip radius: <10 nm
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 591,000
610-0125 Unmounted Type 461,000
SSS-NCH (10ea.)
610-1081 ▪ Non-contact cantilever with super sharp tip
▪ Typical tip radius: ~2 nm (<5 nm)
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 1,277,000
610-0081 Unmounted Type 1,083,000
PPP-NCLR (10ea.)
610-1105 ▪ Non-contact cantilever with low resonant frequency 
▪ Backside reflex coating (Al)
▪ Typical tip length: 10 - 15 μm
▪ Typical tip radius: <10 nm
▪ k = ~48 N/m, f = ~190 kHz
Mounted Type 539,000
610-0106 Unmounted Type 461,000
SSS-NCLR (10ea.)
610-1106 ▪ Non-contact cantilever with low resonant frequency
▪ Backside reflex coating (Al)
▪ Typical tip radius: ~2 nm (<5 nm)
▪ k = ~48 N/m, f = ~190 kHz
Mounted Type 1,277,000
610-0107 Unmounted Type 1,083,000
PPP-NCL (10ea.)
610-1095 ▪ Non-contact cantilever with low resonant frequency 
▪ Typical tip length: 10 - 15 μm
▪ Typical tip radius: <10 nm
▪ k = ~48 N/m, f = ~190 kHz
Mounted Type 591,000
610-0095 Unmounted Type 461,000
SSS-NCL (10ea.)
610-1094 ▪ Non-contact cantilever with low resonant frequency 
▪ Typical tip radius: ~2 nm (<5 nm)
▪ k = ~48 N/m, f = ~190 kHz
Mounted Type 1,161,000
610-0094 Unmounted Type 1,083,000
NSC15/Al BS (10ea.)
610-1011 ▪ Non-contact cantilever
▪ Backside reflective coating (Al)
▪ Typical tip length: 12 - 18 μm
▪ Typical tip radius: <8 nm
▪ k = ~40 N/m, f = ~325 kHz
Mounted Type 389,000
610-0011 Unmounted Type 312,000
AR5-NCHR (10ea.)
610-1055 ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Backside reflex coating (Al)
▪ Typical spike length: ~2 μm
▪ Typical tip radius: <15 nm
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 1,401,000
610-0055 Unmounted Type 1,271,000
AR5-NCH (10ea.)
610-1127 ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Typical spike length: ~2 μm
▪ Typical tip radius: <15 nm
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 1,466,000
610-0127 Unmounted Type 1,271,000
AR5-NCLR (10ea.)
610-1089 ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Backside reflex coating 
▪ Typical spike length: ~2 μm
▪ Typical tip radius: <15 nm
▪ k = ~48 N/m, f = ~190 kHz
Mounted Type 1,466,000
610-0089 Unmounted Type 1,271,000
AR5-NCL (10ea.)
610-1090 ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Typical spike length: ~2 μm
▪ Typical tip radius: <15 nm
▪ k = ~48 N/m, f = ~190 kHz
Mounted Type 1,466,000
610-0090 Unmounted Type 1,271,000
AR5T-NCHR (10ea.)
610-1060 ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Backside reflex coating (Al)
▪ Tip tilt compensation: 13°
▪ Typical spike length: ~2 μm
▪ Typical tip radius: <15 nm
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 1,984,000
610-0060 Unmounted Type 1,906,000
AR5T-NCH (10ea.)
610-1126 ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Tip tilt compensation: 13°
▪ Typical spike length: ~2 μm
▪ Typical tip radius: <15 nm
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 2,100,000
610-0126 Unmounted Type 1,906,000
HARTA-12-2 (5ea.)
605-1123 ▪ Non-contact cantilever with high aspect ratio tip
▪ Backside reflective coating (Al)
▪ Tip shape: Pyramidal
▪ Tip tilt compensation: 12°
▪ Typical spike length: ~2 μm
▪ Typical tip radius: ~30 nm
▪ k = ~40 N/m, f = ~300 kHz
Mounted Type 2,114,000
605-0123 Unmounted Type 2,074,000
HARTA-12-4 (5ea.)
605-1124 ▪ Non-contact cantilever with high aspect ratio tip
▪ Backside reflective coating (Al)
▪ Tip shape: Pyramidal
▪ Tip tilt compensation: 12°
▪ Typical spike length: ~4 μm
▪ Typical tip radius: ~30 nm
▪ k = ~40 N/m, f = ~300 kHz
Mounted Type 2,114,000
605-0124 Unmounted Type 2,074,000
HARTA-12-6 (5ea.)
605-1138 ▪ Non-contact cantilever with high aspect ratio tip
▪ Backside reflective coating (Al)
▪ Tip shape: Pyramidal
▪ Tip tilt compensation: 12°
▪ Typical spike length: ~6 μm
▪ Typical tip radius: ~30 nm
▪ k = ~40 N/m, f = ~300 kHz
Mounted Type 2,535,000
605-0138 Unmounted Type 2,495,000
EBD2-100A (5ea.)
605-1132 ▪ Non-contact cantilever with high aspect ratio tip (>6:1) (HDC/DLC)
▪ Backside reflex coating 
▪ Tip shape: Conical
▪ Tip tilt compensation: 13°
▪ Typical tip length: ~2 μm
▪ Typical tip radius: <5 nm
▪ k = ~40 N/m, f = ~320 kHz
Mounted Type 2,068,000
605-0132 Unmounted Type 1,971,000
EBD4-200A (5ea.)
605-1139 ▪ Non-contact cantilever with high aspect ratio tip (>10:1) (HDC/DLC)
▪ Backside reflex coating 
▪ Tip shape: Conical
▪ Tip tilt compensation: 13°
▪ Typical tip length: ~4 μm (max.)
▪ Typical tip radius: <5 nm
▪ k = ~40 N/m, f = ~320 kHz
Mounted Type 2,068,000
605-0139 Unmounted Type 1,971,000
EBD6-400A (5ea.)
605-1134 ▪ Non-contact cantilever with high aspect ratio tip (>10:1) (HDC/DLC)
▪ Backside reflex coating
▪ Tip shape: Conical
▪ Tip tilt compensation: 13°
▪ Typical tip length: ~6 μm (max.)
▪ Typical tip radius: <5 nm
▪ k = ~40 N/m, f = ~320 kHz
Mounted Type 2,068,000
605-0134 Unmounted Type 1,971,000
MCNT-100 (5ea.)
605-1156 ▪ Non-contact cantilever with thin amorphous CNT tip (HDC/DLC)
▪ Backside reflex coating
▪ Tip shape: CNT
▪ Tip tilt compensation: 12°
▪ Typical spike length: ~100 nm
▪ Typical tip radius: ~2 nm (<5 nm)
▪ k = ~40 N/m, f = ~300 kHz
Mounted Type 7,290,000
605-0156 Unmounted Type 7,128,000
MCNT-150 (5ea.)
605-1157 ▪ Non-contact cantilever with thin amorphous CNT tip (HDC/DLC)
▪ Backside reflex coating
▪ Tip shape: CNT
▪ Tip tilt compensation: 12°
▪ Typical spike length: ~150 nm 
▪ Typical tip radius: ~2 nm (<5 nm)
▪ k = ~40 N/m, f = ~320 kHz
Mounted Type 7,290,000
605-0157 Unmounted Type 7,128,000
MCNT-300 (5ea.)
605-1158 ▪ Non-contact cantilever with thin amorphous CNT tip (HDC/DLC)
▪ Backside reflex coating
▪ Tip shape: CNT
▪ Tip tilt compensation: 3°
▪ Typical spike length: ~300 nm 
▪ Typical tip radius: ~5 nm (<7 nm)
▪ k = ~40 N/m, f = ~320 kHz
Mounted Type 6,520,000
605-0158 Unmounted Type 6,480,000
MCNT-400 (5ea.)
605-1159 ▪ Non-contact cantilever with thin amorphous CNT tip (HDC/DLC)
▪ Backside reflex coating
▪ Tip shape: CNT
▪ Tip tilt compensation: 3°
▪ Typical spike length: ~400 nm
▪ Typical tip radius: ~5 nm (<7 nm)
▪ k = ~40 N/m, f = ~320 kHz
Mounted Type 6,520,000
605-0159 Unmounted Type 6,480,000
MCNT-500 (5ea.)
605-1160 ▪ Non-contact cantilever with thin amorphous CNT tip (HDC/DLC)
▪ Backside reflex coating
▪ Tip shape: CNT
▪ Tip tilt compensation: 3°
▪ Typical spike length: ~500 nm
▪ Typical tip radius: ~5 nm (<7 nm)
▪ k = ~40 N/m, f = ~320 kHz
Mounted Type 6,520,000
605-0160 Unmounted Type 6,480,000
Hi'Res-C14/Cr-Au (10ea.)
610-1155 ▪ Non-contact cantilever with low resonant frequency 
▪ Backside reflective coating (Au)
▪ Typical spike length: 100 - 200 nm
▪ Typical tip radius: ~1 nm
▪ k = ~5 N/m, f = ~160 kHz
Mounted Type 1,336,000
610-0155 Unmounted Type 1,142,000
OMCL-AC240TS (10ea.)
610-1184 ▪ Non-Contact cantilever with low resonant frequency
▪ Backside reflective coating (Al)
▪ Tetrahedral tip on zero setback position
▪ Typical tip length: 14 μm
▪ Typical tip radius: 7 nm
▪ k = ~2 N/m, f = ~70 kHz
Mounted Type 778,000
610-0184 Unmounted Type 701,000

Probe Store