| 고객문의 |
  • NX10-AFM
    혁신적인 연구를 위한 최고의 선택 Park NX10
  • SmartScan-AFM
    AFM 사용자를 위해 더 강력하고 더 쉬워진 Park SmartScan
  • NX20-AFM
    최상의 정확성과 재현성의 실현고장 분석 ⁄ 대형시료 연구용 AFMl Park NX20
  • NX-wafer-AFM
    검열부터 계측까지 자동화된 산업용 AFM Park NX-Wafer
our clients

True Non Contact Mode

당사의 원자현미경 (AFM) 최적의 성능을 얻으려면 Park Systems에서 견적을 요청하십시오. 아래 나열되지 않은 다른 제조업체의 Probe도 주문 가능하오니 담당자에게 문의 바랍니다.
- Nanosensors, Nanotools GmbH, Nanoworld AG, BudgetSensors, Olympus Corp., MikroMasch, Applied Nano Structures, Inc.
당사의 Probe Store 이외 다른 곳에서 주문한 Probe는 보증되지 않습니다.

Part Num. Model / Description   한국판매가
(단위:원)
부가세 별도
  PPP-NCHR (10ea.)    
610-1051 ▪ Non-contact cantilever with high resonant frequency
▪ Backside reflex coating (Al)
▪ Typical tip length: 10 - 15 μm
▪ Typical tip radius: <10 nm
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 494,000
610-0051 Unmounted Type 416,000
  SSS-NCHR (10ea.)    
610-1056 ▪ Non-contact cantilever with super sharp tip
▪ Backside reflex coating (Al)
▪ Typical tip radius: ~2 nm (<5 nm)
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 1,161,000
610-0056 Unmounted Type 1,083,000
  BL-AC40TS (10ea.)    
610-1049 ▪ Probe for imaging soft samples
▪ Backside reflective coating (Au)
▪ Tip shape: Tetrahedral
▪ Effective tip length: ~3.5 μm (total 7 μm)
▪ Typical tip radius: ~10 nm
▪ k = ~0.09 N/m, f = ~110 kHz
Mounted Type 921,000
610-0049 Unmounted Type 843,000
  OMCL-AC160TS (10ea.)    
610-1183 ▪ Non-Contact cantilever with high resonant frequency 
▪ Backside reflective coating (Al)
▪ Tip shape: Sharpened tetrahedral on zero setback position
▪ Typical tip length: ~14 μm
▪ Typical tip radius: ~7 nm
▪ k = ~26 N/m, f = ~300 kHz
Mounted Type 507,000
610-0183 Unmounted Type 429,000
  ATEC-NC (10ea.)    
610-1020 ▪ Non-contact cantilever
▪ Tip shape: Tetrahedral tip on zero setback position
▪ Typical tip length: 15 - 20 μm
▪ Typical tip radius: <10 nm
▪ k = ~45 N/m, f = ~335 kHz
Mounted Type 713,000
610-0020 Unmounted Type 636,000
  ACTA (10ea.)    
610-1201 ▪ Non-contact cantilever
▪ Backside reflective coating (Al)
▪ Tip shape: Pyramidal
▪ Typical tip length: 14 - 16 μm
▪ Typical tip radius: ~6 nm
▪ k = ~37 N/m, f = ~300 kHz
Mounted Type 500,000
610-0201 Unmounted Type 422,000
  PPP-NCH (10ea.)    
610-1125 ▪ Non-contact cantilever with high resonant frequency
▪ Typical tip length: 10 - 15 μm
▪ Typical tip radius: <10 nm
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 591,000
610-0125 Unmounted Type 461,000
  SSS-NCH (10ea.)    
610-1081 ▪ Non-contact cantilever with super sharp tip
▪ Typical tip radius: ~2 nm (<5 nm)
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 1,277,000
610-0081 Unmounted Type 1,083,000
  PPP-NCLR (10ea.)    
610-1105 ▪ Non-contact cantilever with low resonant frequency 
▪ Backside reflex coating (Al)
▪ Typical tip length: 10 - 15 μm
▪ Typical tip radius: <10 nm
▪ k = ~48 N/m, f = ~190 kHz
Mounted Type 591,000
610-0106 Unmounted Type 461,000
  SSS-NCLR (10ea.)    
610-1106 ▪ Non-contact cantilever with low resonant frequency
▪ Backside reflex coating (Al)
▪ Typical tip radius: ~2 nm (<5 nm)
▪ k = ~48 N/m, f = ~190 kHz
Mounted Type 1,277,000
610-0107 Unmounted Type 1,083,000
  PPP-NCL (10ea.)    
610-1095 ▪ Non-contact cantilever with low resonant frequency 
▪ Typical tip length: 10 - 15 μm
▪ Typical tip radius: <10 nm
▪ k = ~48 N/m, f = ~190 kHz
Mounted Type 591,000
610-0095 Unmounted Type 461,000
  SSS-NCL (10ea.)    
610-1094 ▪ Non-contact cantilever with low resonant frequency 
▪ Typical tip radius: ~2 nm (<5 nm)
▪ k = ~48 N/m, f = ~190 kHz
Mounted Type 1,212,000
610-0094 Unmounted Type 1,083,000
  NSC15/Al BS (10ea.)    
610-1011 ▪ Non-contact cantilever
▪ Backside reflective coating (Al)
▪ Typical tip length: 12 - 18 μm
▪ Typical tip radius: <8 nm
▪ k = ~40 N/m, f = ~325 kHz
Mounted Type 389,000
610-0011 Unmounted Type 312,000
  AR5-NCHR (10ea.)    
610-1055 ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Backside reflex coating (Al)
▪ Typical spike length: ~2 μm
▪ Typical tip radius: <15 nm
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 1,466,000
610-0055 Unmounted Type 1,271,000
  AR5-NCH (10ea.)    
610-1127 ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Typical spike length: ~2 μm
▪ Typical tip radius: <15 nm
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 1,466,000
610-0127 Unmounted Type 1,271,000
  AR5-NCLR (10ea.)    
610-1089 ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Backside reflex coating 
▪ Typical spike length: ~2 μm
▪ Typical tip radius: <15 nm
▪ k = ~48 N/m, f = ~190 kHz
Mounted Type 1,466,000
610-0089 Unmounted Type 1,271,000
  AR5-NCL (10ea.)    
610-1090 ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Typical spike length: ~2 μm
▪ Typical tip radius: <15 nm
▪ k = ~48 N/m, f = ~190 kHz
Mounted Type 1,466,000
610-0090 Unmounted Type 1,271,000
  AR5T-NCHR (10ea.)    
610-1060 ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Backside reflex coating (Al)
▪ Tip tilt compensation: 13°
▪ Typical spike length: ~2 μm
▪ Typical tip radius: <15 nm
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 2,100,000
610-0060 Unmounted Type 1,906,000
  AR5T-NCH (10ea.)    
610-1126 ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Tip tilt compensation: 13°
▪ Typical spike length: ~2 μm
▪ Typical tip radius: <15 nm
▪ k = ~42 N/m, f = ~330 kHz
Mounted Type 2,100,000
610-0126 Unmounted Type 1,906,000
  HARTA-12-2 (5ea.)    
605-1123 ▪ Non-contact cantilever with high aspect ratio tip
▪ Backside reflective coating (Al)
▪ Tip shape: Pyramidal
▪ Tip tilt compensation: 12°
▪ Typical spike length: ~2 μm
▪ Typical tip radius: ~30 nm
▪ k = ~40 N/m, f = ~300 kHz
Mounted Type 2,114,000
605-0123 Unmounted Type 2,074,000
  HARTA-12-4 (5ea.)    
605-1124 ▪ Non-contact cantilever with high aspect ratio tip
▪ Backside reflective coating (Al)
▪ Tip shape: Pyramidal
▪ Tip tilt compensation: 12°
▪ Typical spike length: ~4 μm
▪ Typical tip radius: ~30 nm
▪ k = ~40 N/m, f = ~300 kHz
Mounted Type 2,114,000
605-0124 Unmounted Type 2,074,000
  HARTA-12-6 (5ea.)    
605-1138 ▪ Non-contact cantilever with high aspect ratio tip
▪ Backside reflective coating (Al)
▪ Tip shape: Pyramidal
▪ Tip tilt compensation: 12°
▪ Typical spike length: ~6 μm
▪ Typical tip radius: ~30 nm
▪ k = ~40 N/m, f = ~300 kHz
Mounted Type 2,535,000
605-0138 Unmounted Type 2,495,000
  EBD2-100A (5ea.)    
605-1132 ▪ Non-contact cantilever with high aspect ratio tip (>6:1) (HDC/DLC)
▪ Backside reflex coating 
▪ Tip shape: Conical
▪ Tip tilt compensation: 13°
▪ Typical tip length: ~2 μm
▪ Typical tip radius: <5 nm
▪ k = ~40 N/m, f = ~320 kHz
Mounted Type 2,068,000
605-0132 Unmounted Type 1,971,000
  EBD4-200A (5ea.)    
605-1139 ▪ Non-contact cantilever with high aspect ratio tip (>10:1) (HDC/DLC)
▪ Backside reflex coating 
▪ Tip shape: Conical
▪ Tip tilt compensation: 13°
▪ Typical tip length: ~4 μm (max.)
▪ Typical tip radius: <5 nm
▪ k = ~40 N/m, f = ~320 kHz
Mounted Type 2,068,000
605-0139 Unmounted Type 1,971,000
  EBD6-400A (5ea.)    
605-1134 ▪ Non-contact cantilever with high aspect ratio tip (>10:1) (HDC/DLC)
▪ Backside reflex coating
▪ Tip shape: Conical
▪ Tip tilt compensation: 13°
▪ Typical tip length: ~6 μm (max.)
▪ Typical tip radius: <5 nm
▪ k = ~40 N/m, f = ~320 kHz
Mounted Type 2,068,000
605-0134 Unmounted Type 1,971,000
  MCNT-100 (5ea.)    
605-1156 ▪ Non-contact cantilever with thin amorphous CNT tip (HDC/DLC)
▪ Backside reflex coating
▪ Tip shape: CNT
▪ Tip tilt compensation: 12°
▪ Typical spike length: ~100 nm
▪ Typical tip radius: ~2 nm (<5 nm)
▪ k = ~40 N/m, f = ~300 kHz
Mounted Type 7,290,000
605-0156 Unmounted Type 7,128,000
  MCNT-150 (5ea.)    
605-1157 ▪ Non-contact cantilever with thin amorphous CNT tip (HDC/DLC)
▪ Backside reflex coating
▪ Tip shape: CNT
▪ Tip tilt compensation: 12°
▪ Typical spike length: ~150 nm 
▪ Typical tip radius: ~2 nm (<5 nm)
▪ k = ~40 N/m, f = ~320 kHz
Mounted Type 7,290,000
605-0157 Unmounted Type 7,128,000
  MCNT-300 (5ea.)    
605-1158 ▪ Non-contact cantilever with thin amorphous CNT tip (HDC/DLC)
▪ Backside reflex coating
▪ Tip shape: CNT
▪ Tip tilt compensation: 12°
▪ Typical spike length: ~300 nm 
▪ Typical tip radius: ~5 nm (<7 nm)
▪ k = ~40 N/m, f = ~320 kHz
Mounted Type 6,520,000
605-0158 Unmounted Type 6,480,000
  MCNT-400 (5ea.)    
605-1159 ▪ Non-contact cantilever with thin amorphous CNT tip (HDC/DLC)
▪ Backside reflex coating
▪ Tip shape: CNT
▪ Tip tilt compensation: 12°
▪ Typical spike length: ~400 nm
▪ Typical tip radius: ~5 nm (<7 nm)
▪ k = ~40 N/m, f = ~320 kHz
Mounted Type 6,520,000
605-0159 Unmounted Type 6,480,000
  MCNT-500 (5ea.)    
605-1160 ▪ Non-contact cantilever with thin amorphous CNT tip (HDC/DLC)
▪ Backside reflex coating
▪ Tip shape: CNT
▪ Tip tilt compensation: 12°
▪ Typical spike length: ~500 nm
▪ Typical tip radius: ~5 nm (<7 nm)
▪ k = ~40 N/m, f = ~320 kHz
Mounted Type 6,520,000
605-0160 Unmounted Type 6,480,000
  Hi'Res-C14/Cr-Au (10ea.)    
610-1155 ▪ Non-contact cantilever with low resonant frequency 
▪ Backside reflective coating (Au)
▪ Typical spike length: 100 - 200 nm
▪ Typical tip radius: ~1 nm
▪ k = ~5 N/m, f = ~160 kHz
Mounted Type 1,336,000
610-0155 Unmounted Type 1,142,000
  OMCL-AC240TS (10ea.)    
610-1184 ▪ Non-Contact cantilever with low resonant frequency
▪ Backside reflective coating (Al)
▪ Tetrahedral tip on zero setback position
▪ Typical tip length: 14 μm
▪ Typical tip radius: 7 nm
▪ k = ~2 N/m, f = ~70 kHz
Mounted Type 507,000
610-0184 Unmounted Type 701,000
spambots으로부터 이메일 주소가 보호되었습니다. 보시려면 JavaScript를 활성화하세요.
Contact

EVENTS

  July 27 - July 30 , 2020
  November 20 , 2020
 

Atomic Force Microscopy | AFM Microscope | Park Systems